Completed 2007
Timken Plant - Buss & Substation - Cairo, Georgia
Installed electrical portion of a new 12,470 volt substation and 800 amp 480 volt buss duct installation.
Completed 2006
Ga Pacific- Pulpmill Reinstrumentation install new stainless steel tray, pull 450,000 feet of IAC cable, Install 96 new instrument, terminate all plc, DCS, and Honeywell equipment, commission and put on line
Installation of New Security System. -Propex Inc., Nashville, Ga.
Installed modifications to entrance gate system, including foundations, electrical service, and gate installations. Installations of security card systems at all entrance doors. Installation of security cameras.
Loom Equipment Relocation and Installation. - Propex Inc, Roanoke, Ala.
Handled removal, transportation, and installations of looms. Installed new support structure, electrical and mechanical piping services.
Equipment Projects, Mechanical, and Electrical Support Services. - Mohawk, Roanoke, Ala.
Assisted plant with various equipment projects, fabrication and installation of equipment parts, supported plant with equipment installations and start-up.
Aupport Services. - Mohawk, Roanoke, Ala.
Assisted plant with various equipment projects, fabrication and installation of equipment parts, supported plant with equipment installations and start-up.
Alpha 7 Gypsum - Design - Build Gypcrete plant - Fairburn, Georgia
Designed and installed the electrical system for a new process plant in the Gypsum industry. Power, lighting, controls and stand-by power were installed. Performed mechanical installation of equipment,boiler, air compressor and silos for the process.
Completed 2005
Milliken-Valway Plant - Range #7 Modifications - LaGrange, Georgia
Relocate winder and install two pieces of production equipment in the cloth material line, including the installation of new panels, drives, junction boxes and beeders. Also included was the installation of Power Panels and transformers for power to the oil heating facility.
GA Pacific- #2 Recovery Boiler I.D. Fan - Install new drive for I.D. fan and commission on line Package Boiler Go to Savannah Ga. to disconnect 150 ton boiler, Ship to G.P. and reinstall on site.
130" Lamination Line Relocation - ANCI, Roanoke, Ala. -
Removed 12 truck loads of equipment at Green Bay, Wisc. and handled transports to Roanoke, Ala. Built new boiler room, install equipment footings, install pipe trenchs, set and anchored equipment, and installed all electrical and mechanical services to equipment.
New Guard House and Entrance Road Modifications -Propex Inc., Roanoke, Ala
Demo of existiing guard house and services. Installed new foundations, guard house, and all services. Widen and repaved entrance road. Install septic tank system, new security fense and gates, entrance lighting, and communications tower.
Loom Equipment Relocation and Installation -Propex Inc., Nashville, Ga.
Handled removal, transportation, and installations of looms. Installed new support structure, electrical and mechanical piping services.
Support Maintenance Service. - Propex Inc., Nashville, Ga.
Supported electricians and mechanics with various plant projects.
BP Amoco Fabrics and Fibers - Hazlehurst, Ga.
Non-Woven Roof Replacement. Complete area demo, install new structural steel, lighting and electrical system, mechanical piping installations, and new equipment installlations.
BP Amoco Fabrics and Fibers - Nashville, Ga.
Phase II Roof Project. - Roof equipment removal, mechanical piping installation, and electrical services to new Air Handling equipment.
BP Amoco Fabrics and Fibers - Hazlehurst, Ga.
Loom Project Change Out. - Remove existing looms, prep floors, install new looms, complete electrical and mechanical installations.
ANCI - Roanoke, Ala. - Lamination Line Relocation. - Green Bay, Wisc. to Roanoke, Ala.
Complete site building preparation, equipment removal and transportation, equipment foundations and footing, new boiler room installation, all electrical and mechanical installations.
Completed 2004
Ga Pacific-Hot End Mcc Phase II Demo and Installation of MCC at the Hot End #2 Genarator Neutral Breaker - This involved removing one Reactor from reactor room and modifing bus with cable.
Install new Neutral Breaker section and stress new cable to gear.
New Power Control Room at Substation - this was a major outage jog to install new 15Kv tower in swith yard, run new tray, install eight 500 15KV cables, stress all cables at each end, commission curcuit and put on line
Miller Brewery - Albany, Georgia
Install warehouse power & lightning. Install controls for automated conveying system.
Completed
2003
Ga Pacific- P1A Swithgear Phase II of the 13.8 swichgear project. Removal and change out of the old GE gear to new Powell gear
Pre August 15Kv switchgear This job involved repulling new 15kv feeder and install designed box with bus for 7 cables
to be parrelled at this point. Move fault pressure circuits to new gear.
13.8 room Demo Job remove old gear from one area and cut over to new powell gear T1B/T1C switchgear Phase 3 of the Powell gear change. Hot End MCC Replacement the change out of old overduty gear to new AB MCC sections
Proctor & Gamble - Albany, Georgia
Power and Control for conveyor system.
Plant Wansley - Franklin, Georgia
Underground installation of ductbanks, manholes, and grounding for
a two unit combined powerhouse
Shaw Industries - Andalusia, Alabama
Stage 1 Neumag Installation. Set Process Equipment, installed Air
Piping HVAC Duct System, 480V Power & Controls
Mercedes-Benz New Assembly Shop -
Vance, Alabama
480V Power & Lighting / Interior Electrical for new 720k sq.
ft. assembly shop. 30k sq.ft. addition to existing Assembly shop
and plant energy center expansion.
Mercedes-Benz Body Shop & Assembly
Shop - Vance , Alabama
Interior Electrical for (13) Bathrooms and (2) Modular Offices in
New Plant Expansion
Mercedes-Benz Paint Shop InPlant Facilities
- Vance , Alabama
Interior Electrical for (1) Locker room, (6) Bathrooms and (9) Modular
Offices in New Plant Expansion.
Mercedes-Benz Flow Meters - Vance,
Alabama
Instrumentation and Controls for Plant Process Piping.
Knauf Fiberglass Line 621 Rebuild
- Lanett, Alabama
Convert Power & Controls for (36) DC motros to AC.
Completed 2002
Ga Pacific- 15Kv Switch Gear Begin the15KV phase one Powell Switchgear change out. This is the beginning of a three year project to change out all the 15 KV gear at rhe 13.8 room.
#1 Turbine Generator - This project invo;ved removing bus bar section on 13.8 end of tubine due to moisture. Cable bus was installed from turbine to new gear.All was retrofited and stressed 144 15KV 500 mcm
#2 stock Prep. MCC Removal of 14 Line Up of MCC at #2 Stock Prep end of Paper Machine. This work done during a 7 day outage St. Marks Powders/Hybrid Electrical This project involved removal and relocation of 48 instruments to install a new hybrid tank and all the associated conduit, wire and mcc work. This project was done on a July outage.
Kinchafoonee Waste Treatment Plant
- Leesburg, Georgia
Electrical installation for WTP.
Fairbanks Engine - Beloit, Wisconsin
Relocation of 100 machines with new distribution
Completed 2001
Ga Pacific- #3 Paper Machine MCC Change out twelve line-ups of mcc units during this outage St. Marks Powders-North Blender/south Coater Change out MCC for North Blender during July Outage, add new instrumentation at the
South Blender
Milledgeville/Oconnee Water Treatment
Plant - Milledgeville, GA
Renovation and expansion for 2 million GPD water treatment plant.
American Fibers Expansion - Bainbridge, Georgia
45k sq.ft. Yarn Plant - Power, lighting, compressed air, and mechanical
installation
Dyengy Heard County Power Project
- Franklin, Georgia
Underground and embedded conduit for (3) 40 megawatt generators.
Russelville Water Treatment Improvement
- Forsyth, Georgia
Alter and repair electrical systems for existing water treatment
facility.
Completed 2000
Ga Pacific- Water Treatment Plant 2400 volt Mcc Change out 2400 v. line up during outage. Modify bus with Husky Cable Bus.
RAFB Environmental Ground Water Redemption
System, Warner Robins, Georgia
Install power and controls for water wells base wide.
|
